- Make sure this fits by entering your model number.
- Negative Earth Design
- heavily built and fairly large
- Three battery types available and you can define your own battery value
- Three stage charging
40A MPPT Solar Charge Controller with Remote Meter And Temperature sensor / PC monitoring cable.
The Package included the following item:
1. 40A MPPT Solar Charge Controller
2. MT-50 Remote Meter
3. Battery Temperature Sensor
4. PC Software Communication Cable
40A MPPT Charge Controller Technical Data
Nominal System Voltage: 12V, 24V
Max Battery Current: 40A
Nominal Maximum Operating Power:
12 Volt 520W / 24 Volt 1040W
Peak Efficiency: 99%
MPP Voltage Range: Battery Voltage +2V~108V
Maximum PV Open Circuit Voltage(VOC): 150V
Dimension: 303x183x64mm / 11.93×7.2×2.52 inch
A higher than rated input power will not damage the controller as long as its under 3 times the rated value, but do not exceed Voc.
Exceeding Max PV Open Circuit Voltage May Damage the Controller
MT50 Remote Meter
Faceplate dimension:98×98 mm / 3.86×3.86 inch
Frame dimension:114×114 mm / 4.49×4.49 inch
Connector type: RJ45
Meter cable:Standard 2m,Max 50m
Ambient Temperature: -20°C — +70°C/-4°F — 158°F
Remote Temperature Sensor
Acquisition of battery temperature for undertaking
temperature compensation of control parameters
Length: 3 M
USB to RS485 Converter Adapter
This adapter is used to monitor each controller on the network using Solar Station PC software and update the firmware.
You will find the software download link printed on the inside of the packing or contact us to get the download link.