25A Battery Charger – 24V – 2-Bank – 3-Stage w/Dip Switch & Lugs – Includes Temp SensorThis advanced fully automatic three-stage 25 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit, reverse polarity and thermal overload protection. The unit allows charging of up-to 2 separate battery banks.Features:Switch mode technology for high efficiency, lightweight and quiet operationAutomatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel CellCan charge 2 banks of batteries simultaneously, no isolator necessaryCan be used as a power supply or DC UPS when used in conjunction with a batteryUser Configurable AC Input voltage 120 or 230 VAC, 50 / 60 HzUser Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries“Half Power Mode” reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteriesVoltmeter and Ammeter for monitoringFan cooled based on output currentProtections: Short circuit, overload, reverse battery connection and over temperatureIncludes temperature sensor to prevent under/overcharging of battery if temperature varies extensivelySpecifications:Input: 120 VAC or 230 VACOutput: 24 VDCAmps: 25Remote Control: 900-RCWeight: 9 (lbs)Weight: 4.1 (kg)Dimensions: 13.03 x 9.6 x 3.82 (in)Dimension