- Make sure this fits by entering your model number.
- ❶100% 60A MPPT charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.we can send package from our oversea house.very fast
- ❷Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V
- ❸Battery options：Vented/Sealed/Gel/ NiCd/Lithium battery.Dynamic large icon display PV and Battery status,★working mode: Night mode, no charging, MPPT mode, Absorption mode, Floating mode, troubleshooting prompts will tell you how to do to let your solar system work normally.
- ❹Excellent heat dissipation protection: Intelligence Fan-on temperature >45℃
- ❺48 months honor warranty.we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors.Hope you will love it.
MPPT-60A
Tips The load output is only for DC load less 5A current.
Warming tips: Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 times of Battery voltage will be the best efficiency.
Feature:
Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge
Selectable battery type Vented/ Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
Soft start time ≤1S
Dynamic response and recovery time 100us
Max efficiency ≥98.1%
PV utilization ≥99%
In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
Input specification:
12V system: DC20V~DC80V
24V system: DC37V~DC105V
36V system: DC50V~DC160V
48V system: DC72V~DC160V
The maximum PV input voltage (Voc):DC190V
(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)
The maximum PV input power
(The total power rated of PV can’t be over this watt that will break the controller.)
12V system (720W) ;
24V system (1440W) ;
36V system (2100W);
48V system (2800W) ;
Output specification
Overcharging protection voltage:
12V system (15V);
24V system (30V);
36V system (45V);
48V system (60V);
Air circuit breaker and wires requirement
copper wires:9AWG
air circuit:100A
Notes: The output terminal is for lamp only ( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
Package including:
1XMPPT Solar Charge Controller
1XEnglish Manual