- Make sure this fits by entering your model number.
- 3000W continuous 6000W peak true pure sine wave solar power inverter, as good as grid power, power backup for home power supply.
- Transfer 24VDC to 220VAC, 50Hz frequency, dual Universal outlets.Fit all countries . Intelligent temperature control cooling fan. Earth connection for both PCB board and output. Digital LED display.
- High quality true copper inductance, filter the wave form, ensure the true pure sine wave AC output, safeguard your equipment. All big imported mosfets with strong driving capacity.
- The PCB thickness is 2.00mm, allow the stronger current floating on the circuit, increase the load capacity. High frequency transformer to transfer DC to AC, ensure the stable and full AC output
- Free standard battery cables . 1 year warranty.
About us:
Professional manufacturer of pure sine wave inverter for 8 years. Original factory, provide the reasonable price and high quality and fast response to your questions within 24 hours.
Product details:
DC input: 24V
DC input range: 21V-30V
No Load Current Draw: 1.5A
Efficiency:90%-95%
AC output volt: 220V
AC Regulation:3%
Frequency: 50Hz
Socket:15a
Low Voltage Alarm:19.5V-21.5V
Low Voltage Shut Down: 18.5V-20.5V
Over Load: shut off, recover manually Over Voltage
Shut Down: 30.5V
Over Thermal: Shut Off Output Automatically, Over voltage protection
Cooling Ways: Cooling Fan will run when the temperature is over 50 degree
Precautions: 1. Please use the standard battery cables we sent, or a full
power output may not be guaranteed. And the spare fuses in the package
are just used when the original ones are burned by accident.
2. Please do not connect the inverter with the grid power, and a reverse
connection of positive and negative is also forbidden.
3. Please do not overload. If your applications are inductive loads, please
choose the inverters whose continuous power is 3-7 times higher than the
watts of your appliances. If you want to power up a refrigerator, we suggest
you use 10 times higher power inverter.
4. Please turn off the load first then turn off the inverter. And as there is a soft
start function, please turn on the inverter first then turn on your loads, or the
output may not stable at the first seconds.
5. For a red light flashing, it is a kind reminder to note you the input voltage is
a bit high, you can regardless of it. If the input is too high, the inverter will
shut down automaticly.Please make sure your battery is fully charged before
using.
6. The output voltage can be adjusted in a little range.