- Make sure this fits by entering your model number.
- * 500W Grid tie inverter 24V To ac 120V high efficiency For battery 24v Adjustable Power Output pure sine wave inverter
- * this inverters with a unique battery mode function, independent access battery or photovoltaic panels,can automatically recognize;when 26V~ 45V inverter connected to 24V battery, AC power limit output of about 350W,24Vbattery when the operating voltage is below 21V , the inverter will stop output,low voltage battery protection.
- * Photovoltaic solar panels operating modes: The adjustable knob on the inverter to the left twist in the end,Photovoltaic solar panels open mode,The right of the blue LED does not light, then the inverter maximum power pointtracking (MPPT) is automatically enabled
- *Solar Inverter grid-tie – Max Power Point Tracking and Stackable,Island Protection Pure Sine Wave Inverter – Adopting high-frequency isolation transformer type, high efficiency
- * PV and battery mode free to switch.
parameter reference:
PV open voltage range:26v-45v
PV MAX input power(W):560W
PV mode AC MAX output:500W
MPPT Voltage range(V):24v-35v DC
MPP tracking efficienc: 98%
MAX.DC current(A):25A
Suitablefor Battery voltage(V):24V
Battery Low Voltage Protection(V):22V
MAX adjustable power(W):350W
MIN adjustable power(W):80W
AC output range: 110V60HZ
Protection:Islanding; Short-circuit; Low Voltage; Over Voltage;
Over temperature Protection
Machine size(LxWxH):22.2×16.2×5.5CM
Gross Weight:2kg/ unit
packing list:
packing list:
1. 1 unit Grid Tie Inverter
2.1 unit Installation and Operation Manual
3.1.2m AC cord
This system inverter AC output voltage range is 90V-140V,
it doesn’t suitable for using 230V（AC180-260V） If you want use 230V you can contact us by email,
we will offer suitable inverter to you. Thanks!
Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system.
The output need to be connected to the grid power. Can not supply power directly to the AC loads.
Please check the plug and minus when connecting.
Grid Tie Solar inverter – Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency
Make sure that no overvoltage is used at the DC input
it will be damaged if wrong connecting.