- Make sure this fits by entering your model number.
- MPPT 80A Charge Controller, PV input 1920 watts, CE, RoHS, ISO 9001
- Charge 2 group Lithium and Sealed Lead Acid, AGM/Gel, Non-sealed Lead Acid batteries
- Adjustable charging voltage and current, 24V DC Battery Charging
- Input voltage range is DC 30V-92V, it is powered by your Panel Array
- 2x Solar in, 2x Battery in/out, , Size 11.5 in x 6.5 in x 3.5 in
PV input 1920 watts
Constant voltage charge 29.2V(28-30V settable)
Low disconnect voltage 22V(20.8-22.8V settable)
Low reconnect voltage 25.6V(24.4-26.4V settable)
DC 24V 80A MPPT charge controller, this controller works for 24V DC fixed, and the array input voltage range is DC 30V-92V, it is powered by your Panel Array, so even your battery is dropped to the lower capacity, controller will be still working and charging your battery bank. More power from your panels
- Solid built high quality
- Lots of protections
- Large heatsink
- 24V DC Battery Charging
- Wall mount
- 2x Solar in, 2x battery in/out
- Large gauge wiring
- Charge 2 group Lithium and Sealed Lead Acid AGM/Gel Non-sealed Lead Acid batteries
- Adjustable charging voltage and current
About this high efficient solar charge controller:
- MPPT charge controller: MPPT Solar charge controller(Air cooling).
- High efficiency: MPPT efficiency>99%,Peak conversion efficiency >98%.
- Multi-stage charging: Multi-stage charging mode.
- DC load DC load support: 24V Only
- Protection: PV array short circuit , PV reverse polarity , Battery reverse polarity , Over charging , Output short circuit.