- Make sure this fits by entering your model number.
- Suitable for wind turbine 400W, 12VAC(3 wires)
- suitable for 12v system
- Wind Turbine brake Current 40A
- LCD display
- Optional Function 1: RS Communication and Matched Software. Optional Function 2: Low Voltage Charge Function.With this function.,Controller can start charging battery from 2V if runs in 12V battery bank
It is used for the wind turbine 400W with 12VAC output
PERFORMANCE FEATURES:
– Perfect protection function, thus the system has higher reliability.
– LCD display
– Voltage limiting and current-limiting charge mode ensures battery in the best charging status
– Two DC Load output, light-control, time-control, constant output, and multiple output control mode selection
– PWM mode
TECHNICAL PARAMETERS:
Rated Battery Voltage 12V
Rated Wind Turbine Power 400W
Max. Wind Turbine Power 6000W
Wind Turbine brake Current 40A
Dump load start voltage:13.5 V
Complete discharge voltage: 14.5V
Battery under voltage shut off: 10.8V
Battery under voltage recover: 12v
Input over voltage shutoff: 16v
Rate output current of load 1 and load 2: 10A
Rated Solar Powe 150W
Control Mode PWM
Display Parameters:Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage,Over Voltage, UnderVoltage, OverLoad, Short Circuit, Night. Etc
Working Temperature &Humidity: -20~+55 cel.degree/ 0~93%RH(Without Condensation)
Temperature Compensation(optional): 4mV/cel.degree/2V, -35–+80Cel.degree, Precision:+/-1cel.degree
Protection Function: Solar reversechargeprotection,Solar reverseconnection protection,Battery overcharge protection,Battery overdischarge protection,Battery reverseconnection protection, Lightning protection Wind turbine current limiting,
Optional Function 1: RS Communication and Matched Software.
Optional Function 2: Low Voltage Charge Function.With this function.