40amp MPPT Solar Charge Controller for Car RV 12V 24V 36V 48V Max 2080W Input Solar Charge for Agm Lithium Gel Flooded Backlight LCD Display Real Time Monitor by PC with Fan cooling Review

40amp MPPT Solar Charge Controller for Car RV 12V 24V 36V 48V Max 2080W Input Solar Charge for Agm Lithium Gel Flooded Backlight LCD Display Real Time Monitor by PC with Fan cooling

    This fits your .
  • Make sure this fits by entering your model number.
  • The 3rd generation of MPPT Solar Controller, Advance MPPT efficiency ≥99.5%, with 2 years warranty.
  • Intelligent LCD display 48v charge controller shows detail information of System/PV/BAT Voltage, BAT Charging Current/watt/kwh/temp/Type and Load Mode.
  • Fit for AGM / Lithium / Gel / Flooded Batteries; Charge Controller’s Battery Range: 9V-60V; Three stages (fast charge, constant charge, floating charge) charging to prolong your battery’s service life.
  • PV Max. voltage(VOC)130V, Max. Power of Solar panel: 2080W(48V),1560(36V);1040(24V);520W(12V)
  • Four Charage mode control of this charge controller: ON/OFF mode, PV voltage control mode, Dual Time control mode, PV&Time control mode.

Color:EMSART3-40A-II-red

Notice: This MPPT Solar Controller only works for off-grid solar system.

Features :

Advanced MPPT efficiency ≥99.5%,Machine conversion efficiency ≥98%;
DC12V/24V/36V/48V battery system automatic recognition;
Maximum PV input voltage 100V ;
3-Stage charge to extend your battery life ;
Discharge mode: ON/OFF mode, PV voltage control mode.
Battery Range : 9V-60V;For AGM / Lithium / Gel / Flooded Batteries;
Intelligent LCD : System/PV/BAT Voltage;BAT Charging Current/watt/kwh/temp/Type;Load Mode.
RS485 communication.
2 years warranty, and 3~10 years extended warranty service also can be provided

Notice:

1.If you want to connect PC/Laptop,you need to buy an communication cable,YS485.If there is no Communication cable,it`s only can be work for AGM,Flooded,Sealed Batteries.

2.Please be sure your solar panel input voltage is higher than 16V.

Charge Mode:MPPT(Maximum Power Point Tracking)

MPPT Efficiency:≥99.5%
Max PV Input: 130V (Voc)
Rated charge current: 40A
Max Input Power:
520W (12v battery system)
1040W (24v battery system)
1560W (36v battery system)
2080W (48v battery system)

System voltage

•12V battery system:DC9V~DC15V
•24V battery system:DC18V~DC30V
•36V battery system:DC32V~DC40V
•48V battery system:DC42V~DC60V

Constant Voltage:Please check the charge voltage according to the battery type form Contant Voltage(CV) Floating Voltage (CF):

Flooded: CV 14.6V CF 13.8V
Sealed: CV 14.4V CF 13.8V
Gel: CV 14.2V CF 13.8V
User(setting) : CV (9V~15V) CF (9V~15V)(You need to setup by PC,and you need to buy an YS485 Communication cable)

Package including:
1.1PCS 40A MPPT solar charge controller
2.1PCS English User Manual
3.1PCS Temp. Sensor
4.2pcs Hang Bracket

Leave a Reply

Your email address will not be published. Required fields are marked *